A brake is a combined system of levers, hydraulic and frictional forces that can immediately stop the momentum and force the car when used correctly. Brake repair that addresses the whole braking system is complicated requires experience and expertise of a licensed professional, who can ensure that the brakes have been repaired properly, and ready for the safe operation of the vehicle. You can head to a professional brake repair shop in Calgary to get your vehicle's brake system repaired and inspected.
When the vehicle operator presses down on the brake pedal, the master cylinder compresses fluid sending hydraulic pressure to the brake pads. When the pads come into contact with the rotor, they create enough friction to slow and eventually stop the vehicle. Most cars have a disc system connected to a wheel or axle, which is connected to the hydraulic system.
Disks are usually made of cast iron and work with the rotor and pads to create the friction that will slow down the wheels of the car; The most common brake repair service is a replacement brake pad. The bearings are made from organic materials, and come up with a mechanism that will make a squealing noise when they have worn too thin; when the pads make contact with the rotor, it will make a squealing sound that indicates the bearing needs to be replaced.
The hydraulic system is part of the brake system: hydraulics creates enough pressure to apply force to the brake disc that will create the friction to actually slow down the car. Brake fluid is a type of hydraulic fluid that transfers the hydraulic force through the hydraulic lines, and into the braking mechanism.
Typically, when the brake pedal is pushed all the way to the floor, it is an indicator of low brake fluid or a leak in the hydraulic system that require immediate attention through brake repair service. If it is determined that there is a leak, the part must be replaced before operating the vehicle. If there is low brake fluid, it will require a refill.